On-Hand Inventory - Corn Heads

click on picture to open more photos of the heads

IHC 12r30” HALF BREED (inv# 4490)

JD 1243 (inv# 4272)

John Deere 1243 (12row30” Cornhead) s/n 645757 1992

JD 743 (inv# 4434)

John Deere 743 (7row30” Cornhead) s/n 600039 1984

New Holland 996 converted to fit NH CR (12row20” Cornhead)

International 1000 Series Units on JD Frame (12row30” Cornhead)

NH 996 12r20” (inv# 4465)

JD 12r22” (12row22” Corn Head) s/n 640882

JD 12r22” (inv# 4123)

This frame was designed & built by Harv’s Farm Supply, to accommodate the IH 1000 series row units. The Feeder House opening is built to accommodate the following combines: John Deere, IH 8010 or the N H CR Combines. The row units on this head are new, never having been used. The Poly is Poly-Tin. The outer end drive chains is # 80 Roller chain, which is shielded but does not run in oil. The auger is split in the middle, and driven from each end independently.

Tapered Rolls, starting to show wear on front edge. Standard Deck plates, slight cuppage. Gathering chains 75% of stretch available. Sheet metal is straight, with minimal cracks. Level land drive on back of head. Head is painted.

Tapered Rolls are hard surfaced and in good condition. Deck plates are standard and straight. Gathering chains have 75% of their adjustment available. The center snoots are Poly Tin poly dividers. This head was used last on an IH combine.

s/n#823457 Knife rolls, Std. Deck plates. Low acre head. Poly is in very good condition. Has been modified so that if will fit onto NH CR combine.

Pix-all knife rolls, Std. Deck plates. Head will be re-conditioned prior to sale. Currently has metal row divider covers that have been narrowed. - Head is modified to fit a newer AGCO Feeder house with Smart Track.

John Deere 9R20 (9row20” Cornhead) s/n 600200 1984

JD 9R20 (inv# 4437)

600200 (1984 model) High tin on the end fenders This head was built from a 643 that the frame was lengthened. Row units are in average condition. The row divider covers are made like the original dividers that John Deere originally offered. Head was last ran on an IH combine.

John Deere 893 (8row30” Cornhead) s/n 665681 1996

JD 893 (inv# 4283)

Knife rolls, standard deck plates. Originated from South Dakota. New Idler Sprockets Gathering chains 75% of stretch available Poly is faded blue. Level land drive system.

NH 73-C (inv# C-441)

NH 73-C (20’ Flex head) s/n# 655712

Auger painted to eliminate any weather related problems. Nice Head, this head and the NH 96-C 8r30 (below) came from the same home. Both heads are in excellent shape. This head will fit a NH CR, Case 8010 or NH TR. Call for more pictures and information. Long Row Dividers are available for this head.

JD 1290 (inv# 4512)

John Deere 1290 (12row20” Corn head) s/n# 705737 - 2003

UPDATED PHOTOS - Head off rental, through the shop and field ready! Low acres, Ctm ready. 60 series hook up. Poly in GREAT shape. This head is in EXCELLENT Condition, Knife Rolls, Hydraulic Stripper plates.

MF 3000 6r36 (inv#4518)

Massey 3000 6 row 36” Corn Head s/n#HN27556

Massey 6 r 36” head. Low Acres, will fit a Smart Track Combine.

Gleaner 12r30 (inv# 4514)

Gleaner 3000 Hugger 12 row 30” s/n# RHM27631

NICE NICE Head, LOW LOW acres. Call for details. Newer Gathering Chains.

Case 2212-20 (inv# 4516)

CASE 2212-20” (12 row 20” Corn Head) s/n# 000511

Case NH 2212-20” Corn Head. NICE CLEAN Head. Wit fit Case 88 series and Case 7010 or 8010 as well as John Deere combines, with adapter. Poly is in Excellent Shape, Stripper Plates are straight, Knife Rolls are good, Chains are 80% or better. Top and Bottom sprockets are 75%. This is a very well kept head.

JD 1840 (inv# 4546)

John Deere 1840 (18row20” Corn head)

JD 694-36” (inv# 4540)

John Deere 694 - 36” (6 row 36” Corn Head) s/n#655585

JD 1243 (inv# 4533)

John Deere 1243 (12row30” Corn head) s/n# 640789

JD 893 (inv#4529)

Case 2412-20 (inv# 4526)

CASE 2412-20” (12 row 20” Corn Head) s/n# 36020

John Deere 1293 (12row30” Corn head) s/n#HN27556

JD 1293 (inv#4519)

Case 2412-20 (inv# 4528)

CASE 2412-20” (12 row 20” Corn Head) s/n# 36022

John Deere 893 (8row30” Corn head) s/n# 700719

JD 844-38” (inv# 4541)

John Deere 844 - 38” (8 row 38” Corn Head) s/n#517076

JD 894-38” (inv# 4542)

John Deere 894 - 38”” (8 row 36/38”” Corn Head) s/n#705671

Challenger 12r30 (inv# 4558)

2 - Challenger 12r30 (12 row 30” Corn Head) s/n#27582

NH 96C 8r36” (inv# 4556)

NH 98C 8 row 36” (8row36” Corn head) s/n#027128

Case 2206 -30” (6row30” Corn head) s/n#1097

JD 893 (inv# 4554)

John Deere 893 (8 row 30” Corn Head) s/n#697147

JD 1890 18r20” (inv# 4565)

Case 2206-30” (inv#4561)

John Deere 1890 (18 row 20” Cornhead)

IHC 12r20 (inv# 4566)

IHC 12r20 (12 row 20” Corn Head) s/n# BISH Built

JD 930F (inv# C442)

John Deere 930F (900 series 30’ Flex Head)

JD 630F (inv# C449)

- Auger changed to Full Finger

John Deere 630F (600 series 30’ Flex Head)

- Full Finger Auger, 60 series Hook Up, LOW Acres

IHC 1020 (inv# C433)

IHC 1020 (1000 series 20’ Flex Head)

ALMOST NEW!! NEW Gathering Chains, New Drive Sprockets, New Gathering Chain Idler Sprockets, New Hydraulic Deck Plates - Contour Master Drives w. TPS. Factory John Deere Poly w. Crop Dividers, JD 60 Series Single Point Hook-up, Knife Rolls are 65% or greater.

Factory NH fits New Holland CR, Case IH 7010, 8010 and many others with a BISH Adapter. This is a LOW acre head in excellent condition.

2006 model head, NICE NICE NICE, LOW LOW LOW Acres, Will fit a Smart Track Feeder house. Fits Cat Challengers, Massey 8780, 9790 and Gleaner C62 machines - Can be put on John Deere or Case with BISH Adapter.

Bish Buit 1000 Series Units on 12r20 Frame, Poly Tin Poly, LOW LOW Acres on this head. Head has header height sensors installed in poly.

Factory John Deere Poly, Auger 6” flighting 5”, Standard Stripper Plates, Tapered Rolls in Excellent condition, Gathering Chain have 50% adjustment left in them, Drive and idler sprockets in good shape. #80 chain on end drive sprockets.

Factory Case NH Head. NICE, LOW acres, Fits Case 7010, 8010, NH CR, and many others with available BISH adapter. Poly in Excellent Shape, SS Floor in great shape, Knife Rolls in good condition, Hydraulic stripper plates in good condition, 70% + gathering chain life left. Single Point Hook Up installed and Power Shafts Included.

Factory Case NH Head. Fits Case 7010, 8010, NH CR, and many others with available BISH adapter. Poly has a few cracks, Stainless Steel Floor in Good condition, Knife Rolls in Great Shape, Hydraulic Deck Plates have little wear, Sprockets and Gathering Chains in good condition. Power Shafts Included.

Bish Built Frame and head, JD 40 Series Row Units and Poly Tin Poly covers, Fits a John Deere 50 or 60 Series combine. Poly in excellent condition, call Brad B for more details. This head was traded in on JD 1293.

Average Condition Head, Call for details.

BISH Constructed Head, ReConditioned 90 Series Row Units, Factory John Deere Frame, NEW John Deere Back Dividers, 1 season old John Deere Poly Snoots, NEW John Deere End Fenders, NEW Gathering Chains and Idler Sprockets, 1 season on drive sprockets. JD 60 Series Hook Up, HYDRAULIC DECK PLATES!!

BISH Built head. Custom Frame, 90 series Row Units, HYDRAULIC DECK PLATES. was on 60 series John Deere and Cat Lexion. - THIS HEAD WAS LAST ON A CAT LEXION WITH HYDRAULIC AND ELECTRICAL CONNECTIONS. - Frame modification was done by Harvs Farm Supply. THIS IS A NICE HEAD. If you are considering an 18r20 corn head, this is a head that will last a long time.

Factory 6 row 30” head, Standard Deck Plates, CLEAN HEAD, Fits Case 2388 or 7010. New Case Factory Poly Dividers. Front Snoots are in Great Shape. Gathering Chains, sprockets, idlers all in good condition. Overall this is a NICE head.

JD 1093 - JD 1294 - JD 894 - JD 794 - JD 1693 - JD 1653A

IHC 1084-40” w/HYD DECKS - IHC 10row30” - IHC 10row36”

CAT LEXION 12row40” -CAT LEXION 8row40” - CAT LEXION 12row36-38”

CASE 2200 / 2400 - 10row36” - 10row30” - 18row20” - 7row38”

IHC 8r40” HYD DECKS (inv# 4572)

IHC 8R40” 1000 SERIES W/ HYDRAULIC DECK PLATES

Custom BISH Built Frame, IHC row units with NEW Water Pump Kits and Stock Rolls installed. This head is set up to fit a Case 7010-8010 or NH CR combine it can be easily adjusted to fit a John Deere combine. THIS IS A IHC 1000 Series WITH HYDRAULIC DECK PLATES. These row units have been rebuilt, repainted, and then assembled on this head. THIS IS A VERY NICE HEAD. Row divider covers will be metal. HEad is equipped with end drives - single #80 chain.

John Deere 1290 (12row20” Corn head) s/n 695704